Boiler + bucket 2 in 1. 150cm
Made of 0H18N9 stainless steel 0.8mm thick.
It gives the possibility to use it both as a boiler and a deopercular bucket.
The boiler has a coupling sleeve, which supplies water through the hose directly to the tank,
you have a water level sensor, which automatically opens or closes water (depends on water level)
It has 4 heaters, 2kW each
Dimensions 1500×400×445mm
Height with legs 835mm.
380V power supply
Weight 62kg
Includes filter and lid.
Steam wax melter made of 0.8mm thick 0H18N9 stainless steel.
The device is adapted for melting wax and uncapping frames. The melter has a water tank, which is fed through a hose connected to the tank. The tank is equipped with a water level sensor that automatically opens or closes the supply of running water depending on its level. A 6 kW heater was used to heat the water.
Technical parameters:
Dadant frame steam melter, the use of an elongated adapter, adapts the melter to the frame
Greater Poland and Ostrowska.
perforated sieve and drain on the bottom
length: 1500 mm, total length 1700 mm
height: 400 mm, total height 850 mm
445 mm wide, 800 mm overall width
number of chambers: 1 pc
Execution:
acid-proof stainless steel
400V power supply
heating power of the steam generator - 6 kW
number of drains from the table - 1 x 6/4 "socket
weight 62.0 kg
Uncapping table:
sieve - 2 pieces
cover
stand for uncapped frames
rail reducing the table width (max. frame width without mustache 470 mm)