This "Lyson" extractor with the capacity of 4 Dadant frames or 8 mid-rise frames is adapted to work away from electricity sources and also for equipped hives.
If you decide to buy a honey extractor with the battery power supply, then this model is your choice.
When away from the current, you can connect the motor to a 12 V battery, and for full autonomy, but in case you don't have any power supply the extractor has a manual drive!
The device design consists entirely of stainless steel and acid resistant, which makes the extractor durable.
Operated by the CDD Honey Extraction Control Unit, it has a built-in memory with 2 manual programs.
Reversible extractor 4 Frames Dadant manual-electric Optima
W221MS
This "Lyson" extractor with the capacity of 4 Dadant frames or 8 mid-rise frames is adapted to work away from electricity sources and also for equipped hives.
If you decide to buy a honey extractor with the battery power supply, then this model is your choice.
When away from the current, you can connect the motor to a 12 V battery, and for full autonomy, but in case you don't have any power supply the extractor has a manual drive!
The device design consists entirely of stainless steel and acid resistant, which makes the extractor durable.
Operated by the CDD Honey Extraction Control Unit, it has a built-in memory with 2 manual programs.
€1,242.00
664
VAT included
Extractor de 4 cuadros Dadant o 8 cuadros de media alza (altura 145mm)
Jaula reversible manual
Transmisión manual-eléctrica
Extractor dispone de un motor variadod y de una manivela
Fabricado en acero inox. de alta calidad, espesor 0.6mm
Fuente de alimentación 220V/12V
Patas acero con pintura epoxi. Grifo acero inox. Ø5/4"
Cesta acero inox. de barras. Ø600mm
Tapa transparente en policarbonato con seguridad
W221MS
Data sheet
- Type of extractor
- Reversible
- Number of frames
- 4 paintings
- --- -- ---
- 8 half hikes
- Line
- Optimal
- Tank diameter
- 600 mm
- Frame model
- Dadant
- -- --
- Average rise
- Transmission
- Manual + Electric
- Power supply
- 12/220V
- Engine
- 24V/250W
- Metal thickness of the tank
- 0.6 mm
- Valve or Thread
- Stainless Steel Valve 5/4" 40mm
- Cover bar
- Powder-coated paint
- Polycarbonate lid
- 3 mm
- Legs
- Short, painted to dust
- Hinges
- Plastic
- Basket
- Stainless Steel 3 and 5 mm
- Tank reinforcement
- Powder-coated painted steel
- Reinforcing the vat
- Not included
- Tank height
- 730 mm
- Warranty
- 3 years
- Assembly and packaging
- Self-assembling extractors (supplied in a cardboard box)
- Control command
- CDD
- Weight approx.
- 40.7
New product
664
Related products
(There are 16 other products in the same category)
