Vehicle: Special alcidic resin modified.
Pigments: Mixture of organic and inorganic pigments with maximum resistance to the outside.
Solvents: Hydroc. Aromatic mainly.
Specific weight (23oC): 1,400 ± 0.050gr/l.
Viscosity: 90 ± UK at 20oC
Number of components: 1
Recommended dry film: 35 ± 5 microns.
Finish: Satin smooth
Solids by weight: 69 ± 2%
Solids in volume: 50 ± 2%
Inflammation pto (23oC): 26oC in closed cup
Air drying(23oC, 65% H.R.A. And 35 dry microns):
To the touch 15min approx
To dust 30 min approx
Part handling approx. 1h
Repainting minimum 1h
Curing is done by evaporation of solvents and chemical reaction with the origin.
The theoretical yield is approx. 5 m2/kg for a thickness of 35 microns. The
practical performance will depend on application losses, irregularities
USES AND APPLICATIONS
It is a synthetic finishing enamel, applicable on metal surfaces
properly clean, degreased and printed with primers
appropriate ancorrosive. It can also be applied on old paints
strongly attached, sanded and healed.
Quick drying and hardening.
Excellent hardness, flexibility and adhesion on metal and primers
Good freshwater behavior and saline environments.
Good resistance to the outside and sunlight.
Not recommended for harsh environments or immersion.
Before applying, shake the contents of the container and homogerreizn the paint well.
It is recommended to apply to conventional and airless gun.
Apply with temperatures between 10 and 45 "C, and relative humidity between 0 and 85%.
Use as an application solventand for CLEANING ROCHASOL UNIVERSAL.
Up to 12 months in original closed container.
Watch out for frost and direct sun exposure.
SAFETY, HYGIENE AND ENVIRONMENT
In general, avoid contact with eyes and skin.
Wear appropriate gloves, protective goggles and clothing during application.
Keep out of reach of children.
Use only in well-ventilated places.
Do not pour debris into the drain.
Keep the container tightly closed and in an appropriate place.
Ensure proper product transport.
Prevent any accidents or incidents that may occur during the
Keep the container in a safe place in the correct position.
Do not use or store the product in extreme temperasure conditions.
It shall take into account the legislation in force relating to AMBIENTE, HIGIENE,
HEALTH AND SAFETY at work.
For more information, it is essential to read the packaging e-card and the safety sheet.
We guarantee the quality of our products in accordance with our general conditions
sales and supply. Our technical user advice expressed verbally, by
written or by means of essays, an offense according to our knowledge and
current experiences. They are simple indications, which do not compromise our
responsibility, nor do you give them the need to verify for yourself that the products
provided by us correspond to the procedures and objectives sought by you,
conducting their own checks and tests.
The application and use of the products, are beyond our control possibilities, and in
depend exclusively on your personal responsibility, not being able to
responsible for different results from those reflected herein. Our recommendations in
security matters, are not an ideal for you to determine your own measures,
adapted to the very conditions of your facilities. We reserve the right to vary
the data contained herein, without prior notice, according to the technological evolution of the same.